My Wishlist
My Cart

Mini Cart

  • Home
  • Knowledge base

Manuals & tutorials

  1. Clean hot-end, unclog hot-end
  2. FELIX Pro 1 - heated bed improvement
  3. User manuals and Quickstart manuals
  4. How to apply kapton tape
  5. Connect peripherals to the Pro 2/3 Touch, webcam and ethernet (LAN)

3D printing Tips and tricks

  1. Manually Turn Off Filament Detection (Pro Series)
  2. Decrease Homing Temperature Of Z-Axis
  3. Adjust The Filament Clamping Mechanism (Pro Series)
  4. Clean hot-end, unclog hot-end
  5. How To Print Flexible Filament.
View All 9 articles

Troubleshooting - Print Preparing Issues

  1. Manually Turn Off Filament Detection (Pro Series)
  2. Cannot Connect My Printer To The Computer
  3. Printer Doesn't Start Printing
  4. The Extruder Makes A Loud Clicking Noise And No Material Is Being Extruded
  5. Printer Doesn't Heatup, Stops Heating, Heater Decoupled / DEF / DEC
View All 10 articles

Troubleshooting - Printjob Startup Issues

  1. Manually Turn Off Filament Detection (Pro Series)
  2. Z-Sensor Issues, Leveling Not Working Tec 4
  3. The Z Axis Makes A Lot Of Noise When Moving
  4. Nozzle(S) Too Close /Too Far To Bed, During First Layer
  5. The Z Axis Makes A Lot Of Noise When Moving
View All 11 articles

Troubleshooting - Issues During Printing

  1. Shifted Prints, Jumps During Printing
  2. Manually Turn Off Filament Detection (Pro Series)
  3. Printed Part Sags After A Few Layers
  4. The Z Axis Makes A Lot Of Noise When Moving
  5. Hot-End PEEK Part Melted
View All 9 articles

Troubleshooting - Issues After Printing, Print Quality

  1. Shifted Prints, Jumps During Printing
  2. Bad Final Part Print Quality
  3. Holes In Printed Object Or Very Brittle Parts
  4. Z-Axis Moves Down Slowly When Idle For Pro

Troubleshooting - DIY kit related

  1. Z-Sensor Issues, Leveling Not Working Tec 4
  2. How to apply kapton tape

Order and Returns

  1. Orders And Returns
  2. Shipping
  3. Warranty