My Wishlist
My Cart

Mini Cart

  • Home
  • Knowledge base

Manuals & tutorials

  1. Clean hot-end, unclog hot-end
  2. FELIX Pro 1 - heated bed improvement
  3. User manuals and Quickstart manuals
  4. Connect peripherals to the Pro 2/3 Touch, webcam and ethernet (LAN)
  5. How to apply kapton tape

3D printing Tips and tricks

  1. How To Print Flexible Filament.
  2. Clean hot-end, unclog hot-end
  3. Manually Turn Off Filament Detection (Pro Series)
  4. How To Pause A Print Via Gcode
  5. Lower Minimum Extrusion Temperature
View All 9 articles

Troubleshooting - Print Preparing Issues

  1. "Home All Or Home Z", Freezes Up Printer
  2. Cannot Connect My Printer To The Computer
  3. Manually Turn Off Filament Detection (Pro Series)
  4. One Of Motors Not Working, Printer Axis Not Moving.
  5. Homing Issues, Printing In The Air, Z Sensor Triggered, Bed Leveling Issues(G32/G33 Leveling Failed)
View All 10 articles

Troubleshooting - Printjob Startup Issues

  1. Nozzle(S) Too Close /Too Far To Bed, During First Layer
  2. Manually Turn Off Filament Detection (Pro Series)
  3. Z-Axis Moves Down Slowly When Idle For Pro
  4. The Z Axis Makes A Lot Of Noise When Moving
  5. Homing Issues, Printing In The Air, Z Sensor Triggered, Bed Leveling Issues(G32/G33 Leveling Failed)
View All 11 articles

Troubleshooting - Issues During Printing

  1. Manually Turn Off Filament Detection (Pro Series)
  2. Hot-End PEEK Part Melted
  3. The Z Axis Makes A Lot Of Noise When Moving
  4. Printed Part Sags After A Few Layers
  5. "Click To Reheat" Dialogue, Filament Detection (Pro Series)
View All 9 articles

Troubleshooting - Issues After Printing, Print Quality

  1. Bad Final Part Print Quality
  2. Z-Axis Moves Down Slowly When Idle For Pro
  3. Shifted Prints, Jumps During Printing
  4. Holes In Printed Object Or Very Brittle Parts

Troubleshooting - DIY kit related

  1. Z-Sensor Issues, Leveling Not Working Tec 4
  2. How to apply kapton tape

Order and Returns

  1. Warranty
  2. Shipping
  3. Orders And Returns