The easy all-rounder for prototypes, concept models and education. Sharp detail and a clean surface.
Made by FormFutura. Choose your colour and spool size.
The easy all-rounder. EasyFil ePLA is very easy to print, gives accurate parts with a clean surface and comes in six colours. The first choice for prototypes, concept models and anyone new to 3D printing.
| Nozzle temperature | 200 – 275 °C |
|---|---|
| Build plate temperature | 50 – 60 °C |
| Cooling fan | 80 – 100 % |
| Print speed | 25 – 300 mm/s |
| Closed build chamber | Not needed |
| Drying | Not necessary |
| Experience level | Beginner |
| Density | 1.24 g/cm³ (ASTM D792) |
|---|---|
| Tensile strength at yield | 60 MPa (ASTM D882) |
| Tensile strength at break | 53 MPa (ASTM D882) |
| Elongation at yield | 6 % (ASTM D882) |
| Flexural strength | 83 MPa (ASTM D790) |
| Impact strength, Izod notched | 16 J/m (ASTM D256) |
| Heat deflection temperature | 55 °C (HDT A) |
| Glass transition temperature | 60 °C (ASTM D3418) |
| Brand | FormFutura |
|---|---|
| Material | PLA |
| Filament diameter | 1.75 mm |
| Spool sizes | 1 kg and 2.3 kg |
| Colours | Traffic Black, Signal White, Ultramarine Blue, Traffic Red, Iron Grey, Natural |
| Compliance | RoHS 2011/65/EC, REACH 1907/2006/EC |
| Datasheets | TDS · SDS |
Settings and typical values as published by FormFutura. More about this material: use cases and specifications.
| Price | €0.00 |
|---|---|
| Printer Model | FELIX 3.1 |
| Shipment | ![]() |
