FELIX Tec 4 / 4.1 - Heat Break - Version 2
FELIX Tec 4 / 4.1 - Heat Break - Version 2
€14.64
€12.10
Heat Break for the FELIX Tec 4 and 4.1 - Version 2. This part connects the barrel to the base.
Please note: only usable if you have a FELIX Tec hot-end bought AFTER 10-09-2018. For hot-ends, DIY Kits or fully assembled Tec 3D printers purchased before this date, please check the Version 1 Heat Break.
FELIX Tec 4 / 4.1 - Heat Break - Version 2 is available to buy in increments of 1
| Price | €12.10 |
|---|---|
| Printer Model | FELIX Tec 4.1 |
| Shipment |  |
| Weight | 0.050000 |
FELIX Tec 4 / 4.1 - Heat Break - Version 2
€14.64
€12.10
-
+
We found other products you might like!
FELIX Tec Series - Maintenance and Repair Kit
As low as €13.31 €11.00