TitanX - ABS filament

As low as €34.99 €28.92

Engineering ABS for strong parts that see heat or load, with minimal warping and no styrene smell.

Made by FormFutura. Choose your colour and spool size.

- +
TitanX - ABS filament is available to buy in increments of 1
Availability:In stock
SKU FF-TITANX

An engineering ABS without the usual ABS problems. TitanX prints with minimal warping, bonds strongly between layers and is far more impact resistant than regular ABS. For parts that have to work.

What you use it for

  • Engineering parts. Strong, impact-resistant parts with a heat deflection temperature of 85 °C.
  • Fit testing and functional prototypes. Precise printing with fine detail, so a test part behaves like the final one.
  • End-use parts and short runs. Good enough to use: small series and replacement parts straight from the printer.

Recommended print settings

Nozzle temperature245 – 270 °C
Build plate temperature100 – 110 °C
Cooling fan0 – 50 %
Print speed60 – 80 mm/s
Closed build chamberRecommended
DryingRecommended: 45 – 60 °C for 12 hours
Bed adhesionUse an adhesive as protective layer

Material properties

Density1.05 g/cm³ (ASTM D792)
Tensile strength at yield460 kg/cm² (ASTM D638)
Elongation at break10 % (ASTM D638)
Flexural strength740 kg/cm² (ASTM D790)
Impact strength, Izod notched33 kg·cm/cm (ASTM D256)
Heat deflection temperature85 °C (ASTM D648, HDT A)
Vicat softening temperature93 °C (ASTM D1525)
FlammabilityUL94 HB

Product

BrandFormFutura
MaterialABS
Filament diameter1.75 mm
Spool sizes0.75 kg and 2.3 kg
ColoursBlack, White, Dark Blue, Red
ComplianceRoHS 2011/65/EC, REACH 1907/2006/EC
DatasheetsTDS · SDS

Settings and typical values as published by FormFutura. More about this material: use cases and specifications.

More Information
Price€0.00
Printer ModelFELIX 3.1
Shipment
TitanX - ABS filament
As low as €34.99 €28.92
- +